Install Free Gold Price Widget!

Install Free Gold Price Widget!

Install Free Gold Price Widget!








  • Why just battery pack be removed when welding on a leaf . . .
    --Removal is not necessary because the paint oven will be kept to 100 degrees for an hour or two My car will be baked last and left overnight to dry in the oven Get that in writing (and make sure they mean 100 F )but if they really only bake at 100F then this is less abuse than the cars in PHX see daily
  • How to drop a Nissan Leaf battery pack (without an auto . . .
    How to drop a Nissan Leaf battery pack (without an auto lift) Note that Harbor Freight sells sets of impact sockets that skip from 17mm to 19mm, you really need an 18mm I got mine at NAPA for $7 18mm wrench, for eight of the bolts holding the battery to the bottom of the car (potentially optional, if you use the impact driver for everything ) 16mm wrench, for 4 bolts on the back of the battery
  • Nissan Leaf battery degradation data: 24 vs 30 kWh batteries
    Remember that the option to limit the charge to 80 % was removed when the 2014 model Because in the same conditions the 30 kWh battery will likely be hotter In the 24 kWh battery pack, each module has 4 cells, while in the 30 kWh variant there are 8 cells per module this is just Leaf Spy being unable to “interpret” the health of
  • How to open a 2013 Nissan Leaf battery pack and remove the . . .
    How to open a 2013 Nissan Leaf battery pack and remove the modules It is held on with 12 10mm bolts and 4 10mm nuts (on the end) Then, it’s just a matter of removing some plates from the top of the sub-pack Two of them held on by 5 bolts each cover the bms wires and busbar guards, and must come off
  • Updated Nissan Leaf Battery — 50% More Battery
    In other markets, the 62-kWh battery pack Leaf Plus will be called the Nissan LEAF e+, just to make sure everyone is a little bit confused all the time Depending on who you ask, you may get to a
  • Battery pack welding: tips for improving tab-to-terminal . . .
    The critical process step for battery pack welding is joining the individual batteries together using a collector plate which consists of tabs for the individual cells to be welded to both the positive and negative terminals Many packs also need a smaller number of collector plate-to-bussbar connections
  • Battery Welding Considerations
    This video explains about weld current while welding batteries, and demonstrates how to aid in connecting cells into battery packs using metal tabs such as nickel Learn More About Battery Tab
  • Battery pack welding: which technology for your job?
    Selecting the most suitable technology and process for battery pack manufacture Selection of the most suitable technology and process is based on two main factors: tab thickness and material Resistance spot welding, micro-TIG welding, and laser welding technologies each have specific features that align well to these joining needs A clear understanding of the technologies and application is needed to implement an efficient and reliable production welding system


















Gold Price,Buy Gold,Sell Gold ©2005-2009
|Forex Price |Forex Quote |Currency Exchange Rate |disclaimer